Custom Hollow Plastic Profiles
Develop a custom hollow plastic profile around your section drawing or sample. Share the intended function, dimensions and mating details with TOSEN so the profile can be reviewed for your project.
Define the Hollow Section
Start with what the continuous section must do: provide support, cover a space or serve another defined purpose. A hollow section can help address both geometry and weight targets; the required shape and walls depend on the application.
Show the actual cross section rather than assuming a square or rectangular tube. Identify every cavity and internal wall, along with the surfaces that matter to installation.
Drawing Input Checklist
Use a dimensioned drawing or marked sample to identify the following. Add your required tolerances and measurement method to critical features.
| Field | What You Supply |
|---|---|
| Section shape | Cross-sectional drawing or sample |
| Outside dimensions | Width and height (mm) |
| Inside dimensions | Internal boundaries (mm) |
| Wall thickness | Each wall location (mm) |
| Cavity count | Number of cavities |
| Cavity dimensions | Each opening or bore (mm) |
| Corner radii | Required radii (mm) |
| Length and straightness | Targets and inspection method (mm) |
| End preparation | Cutting or drilling details |
Review the Mating Interfaces
Identify the parts that meet the profile, their nominal dimensions and the intended fixing method. Show insertion direction, contact surfaces, clearances and any hole or fastener locations on an assembly drawing.
Nominal mating dimensions describe the parts and space the profile must fit. Free-state profile geometry describes the section before installation; where it changes during assembly, show both conditions and the intended fit for review.
Material and Sample Review
Provide your specified material or material requirements, color and surface finish, together with the service environment and any tests needed for the application. Include the operating conditions and acceptance criteria for any required performance evaluation.
- Share the section drawing or sample and the mating-part details for an engineering review.
- Agree on the features, tolerances and inspection methods to check on a project sample.
- Review the sample against the drawing and trial it with the mating parts. Resolve any changes before approval and production planning.
Request a Project Quotation
Send your drawing, 3D model or sample, estimated quantity, required lengths and end processing. Include material and finish requirements, packaging needs, testing requirements, delivery destination and requested schedule when available. You can discuss the broader custom extrusion solution or contact TOSEN with your project details.
If your task is to locate, edge or engage a component with an open channel, see custom plastic U channels. That is a separate profile selection task; any assembly relationship must be reviewed for the project.